South Ayrshire · Scotland
AGA and Range Cooker Removal in Ayr
Replacing an AGA in Ayr? Our vetted specialists strip it down on site and carry it out, anywhere in South Ayrshire.
Where we work around Ayr
Ayr is in the South Ayrshire council area in Scotland. That includes the KA7, KA8 and KA6 postcode districts. Nearby places we also cover include Prestwick, Joppa and Dalrymple.
AGA and Range Cooker Removal in Ayr: local know-how
If your Ayr AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust. In Ayr detached homes, side access often gives a shorter route for castings than carrying them through the house.
Scotland's towns have a lot of sandstone and granite buildings, tenement flats and harled houses, with Scottish building standards rather than English Building Regulations applying. Victorian and pre-war Ayr houses often have original tiled or flagstone floors, which we cover with boards before moving castings. Holiday cottages in Ayr often swap AGAs for more economical cookers, and we schedule removals between bookings. Solid-fuel and oil-fired Rayburns are still found in rural homes around Ayr, and waste carriers here must be registered with SEPA.
What we can do in Ayr
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Typical costs in Ayr
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
Prices are a guide. Your quote for Ayr is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Ayr
Can you remove a range cooker from my Ayr kitchen?
Yes. We remove modern range cookers in Ayr using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.
Do you cover Irvine and Kilmarnock as well as Ayr?
Yes. Our AGA and range cooker removal service covers Ayr and the wider area, including Irvine and Kilmarnock, along with rural properties across South Ayrshire.
Is my old AGA in Ayr worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Ayr customers.
Do you remove Rayburns in Ayr?
Yes. We remove Rayburns, Stanleys and Esse cookers in Ayr and nearby Irvine. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Will removing my AGA make a mess?
Dismantling an AGA is dusty because the oven castings are packed in insulation. A good team lays boards and dust sheets, vacuums insulation as each section comes out using an industrial extractor, and bags it immediately. The work area should be left swept and vacuumed, though we recommend moving delicate items out of the kitchen beforehand.
Helpful guides
Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →Get a free aga and range cooker removal quote in Ayr
Tell us what you need and we'll come back with a clear price.
Request a quote