AGA and Range Cooker Removal FAQs
Straight answers to the questions we're asked most.
How much does it cost to remove an AGA?
Removing a two-oven AGA typically costs £350–£550, including dismantling, insulation removal, clean-up and recycling. Three and four-oven models usually cost £450–£750. Fuel disconnection by a Gas Safe, OFTEC or electrical engineer is extra if not already done. If your cooker can be reconditioned and resold, the removal price may be lower.
How heavy is an AGA cooker?
A traditional two-oven cast-iron AGA weighs around 400 kg, and larger four-oven models weigh considerably more. That is why AGAs are never moved in one piece. They are dismantled on site into hotplates, oven castings and panels, the heaviest of which weigh roughly 50–90 kg and can be carried by two people.
Can an AGA be removed in one piece?
Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Is my old AGA worth anything?
Possibly. There is a trade in reconditioned AGAs and Rayburns, and a cooker with sound castings, good enamel and all its parts may have resale value. Badly chipped enamel, cracked castings or missing parts reduce this sharply. Send clear photos of the cooker and its data badge and we will give you an honest view.
Do old AGAs contain asbestos?
Some older cast-iron cookers can contain asbestos in rope seals, gaskets, flue pipes or insulation, especially models made several decades ago. Not all do, and you cannot tell by looking. If your cooker or flue is old or its history is unknown, have it sampled by a qualified surveyor before dismantling, so any asbestos is removed safely and legally.
Who disconnects an oil-fired AGA?
Oil-fired AGAs and Rayburns are normally disconnected by an OFTEC-registered technician, who isolates the oil supply and caps the line. Gas and LPG models need a Gas Safe registered engineer, and electric models a competent electrician. We can arrange the right engineer for your cooker so it is safe before dismantling begins.
What happens to the flue when an AGA is removed?
The flue pipe and any register plate are taken down as part of the removal, and the opening into the chimney or wall is temporarily covered. If you plan to install a new range cooker or wood burner, your installer must check whether the existing flue or chimney is suitable for the new appliance before connecting it.
Will removing my AGA make a mess?
Dismantling an AGA is dusty because the oven castings are packed in insulation. A good team lays boards and dust sheets, vacuums insulation as each section comes out using an industrial extractor, and bags it immediately. The work area should be left swept and vacuumed, though we recommend moving delicate items out of the kitchen beforehand.
What do I do if my Rayburn heats my radiators?
If your Rayburn or Stanley has a boiler, a plumber or heating engineer must drain the heating system and cap the flow and return pipes before removal. You will need another source of heating and hot water ready, or arranged soon after. We can coordinate timing with your heating engineer to keep the gap as short as possible.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
What should I do to prepare for AGA removal?
Switch the cooker off at least a day before, arrange or confirm the fuel disconnection, and clear the kitchen of anything fragile. Empty the warming oven and remove any rails or utensils hung on the cooker. Make sure there is parking close to the door for a van, and tell us about steps or narrow corridors on the route.
Get a free aga and range cooker removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote