AGA and Range Cooker Removal
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.

What's involved
The fuel decides who must disconnect the cooker. Mains gas and LPG models need a Gas Safe registered engineer to isolate and cap the supply. Oil-fired AGAs and Rayburns are usually disconnected by an OFTEC-registered technician, who isolates the oil line at the tank or fire valve and caps the pipe. Electric models need a competent electrician to isolate the dedicated circuit. Solid-fuel cookers need the fire fully out and cold for at least a day. The flue pipe and any register plate are taken down as part of the removal, and the chimney or flue opening is temporarily covered. If you plan to install a new cooker or stove, your installer will need to check whether the existing flue is suitable. We coordinate these trades so they arrive in the right order and the dismantling team is not left waiting, and we confirm in writing who is responsible for each step before the day.
How we handle it
Send details and photos
Tell us the make, model, number of ovens, fuel type and whether it heats water or radiators. Photos of the cooker, its data badge, the flue and the route out let us plan and price accurately.
Fixed quote and plan
We confirm a single fixed price, the number of crew, how long the job should take, and which engineer is needed to disconnect the fuel supply. If the cooker may contain asbestos, we recommend testing first.
Disconnection and cooling
The cooker is switched off at least 24 hours before so the castings are cold. A Gas Safe, OFTEC or electrical engineer isolates and caps the supply, and any boiler circuit is drained.
Dismantling and removal
The team protects floors, strips the cooker into sections, vacuums insulation, and carries the castings out. A typical two-oven AGA takes three to five hours from start to clean-up.
Clean-up and recycling
The alcove is swept and vacuumed and the flue covered. Cast iron is recycled or sent for reconditioning, and you receive a waste transfer note for everything removed.
Price guide
AGA and range cooker removal is priced on the cooker's size and weight, how much dismantling it needs, the fuel type and the access. A modern range cooker is a short job. A four-oven cast-iron AGA with a boiler and an awkward route can take most of a day. Reconditionable cookers may lower the price.
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
Questions about flue and fuel line making-safe coordination
What happens to the flue when an AGA is removed?
The flue pipe and any register plate are taken down as part of the removal, and the opening into the chimney or wall is temporarily covered. If you plan to install a new range cooker or wood burner, your installer must check whether the existing flue or chimney is suitable for the new appliance before connecting it.
Who disconnects an oil-fired AGA?
Oil-fired AGAs and Rayburns are normally disconnected by an OFTEC-registered technician, who isolates the oil supply and caps the line. Gas and LPG models need a Gas Safe registered engineer, and electric models a competent electrician. We can arrange the right engineer for your cooker so it is safe before dismantling begins.
Do old AGAs contain asbestos?
Some older cast-iron cookers can contain asbestos in rope seals, gaskets, flue pipes or insulation, especially models made several decades ago. Not all do, and you cannot tell by looking. If your cooker or flue is old or its history is unknown, have it sampled by a qualified surveyor before dismantling, so any asbestos is removed safely and legally.
Other services
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Flue and Fuel Line Making-Safe Coordination near you
Get a free aga and range cooker removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote