Hampshire · South East
AGA and Range Cooker Removal in Farnborough
Range cooker removal in Farnborough, Camberley and Aldershot is handled by experienced crews with the right trolleys and extraction kit.
Where we work around Farnborough
Farnborough falls within Hampshire, South East. Postcodes we cover here include GU14, GU11, GU17, OX12 and OX17. The same team covers Yateley, Frimley, Ash Vale, Elvetham Heath and Mytchett too.
AGA and Range Cooker Removal in Farnborough: local know-how
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. In older Farnborough properties, an AGA may sit in an inglenook or chimney breast, and the surrounding brickwork needs protecting during dismantling.
Many Farnborough families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder. Suburban homes in Farnborough usually have a driveway close to the kitchen door, which keeps a long dismantle running smoothly.
What we can do in Farnborough
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Typical costs in Farnborough
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
Prices are a guide. Your quote for Farnborough is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Farnborough
How much does AGA removal cost in Farnborough?
AGA removal in Farnborough typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Do builders in Farnborough use your AGA removal service?
Yes. Kitchen designers and builders across Hampshire use us to remove AGAs before a refit, saving their crews a heavy, dusty day and keeping the Farnborough project on schedule.
What about asbestos in my old Farnborough AGA?
Older cookers and flues can contain asbestos. If yours is old or its history is unknown, we recommend testing by a qualified surveyor in Farnborough before dismantling so any asbestos is removed by trained specialists.
Will AGA removal in Farnborough damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Farnborough homes are covered carefully throughout.
Will removing my AGA make a mess?
Dismantling an AGA is dusty because the oven castings are packed in insulation. A good team lays boards and dust sheets, vacuums insulation as each section comes out using an industrial extractor, and bags it immediately. The work area should be left swept and vacuumed, though we recommend moving delicate items out of the kitchen beforehand.
What happens to the flue when an AGA is removed?
The flue pipe and any register plate are taken down as part of the removal, and the opening into the chimney or wall is temporarily covered. If you plan to install a new range cooker or wood burner, your installer must check whether the existing flue or chimney is suitable for the new appliance before connecting it.
Helpful guides
How Is an AGA Removed? The Dismantling Process Explained
An AGA is removed by dismantling it where it stands. A qualified engineer makes the fuel supply safe, then the team removes the lids, top…
Read the guide →Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You…
Read the guide →Get a free aga and range cooker removal quote in Farnborough
Tell us what you need and we'll come back with a clear price.
Request a quote