Wiltshire · South West
AGA and Range Cooker Removal in Melksham
Farmhouses, townhouses and cottages in Melksham and nearby Devizes can book fixed-price range cooker removal with a full clean-up.
Find out if your Melksham AGA is worth reconditioning. Ask us.
Where we work around Melksham
We cover all of Melksham and the wider Wiltshire area. That includes the SN12 postcode districts. Nearby places we also cover include Bowerhill and Steeple Ashton.
AGA and Range Cooker Removal in Melksham: local know-how
Oil-fired and solid-fuel AGAs and Rayburns are common in farmhouses around Melksham, and we coordinate the right engineer for each. Long carries across yards and gravel drives near Melksham are normal for our crews, but tell us how far the van can get.
Holiday lets, second homes and rural properties make up a bigger share of the South West than most regions, and lanes can be narrow for larger vehicles. Victorian and pre-war Melksham houses often have original tiled or flagstone floors, which we cover with boards before moving castings.
What we can do in Melksham
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Typical costs in Melksham
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
Prices are a guide. Your quote for Melksham is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Melksham
Do you remove Rayburns in Melksham?
Yes. We remove Rayburns, Stanleys and Esse cookers in Melksham and nearby Devizes. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
How much does AGA removal cost in Melksham?
AGA removal in Melksham typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Will AGA removal in Melksham damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Melksham homes are covered carefully throughout.
Is my old AGA in Melksham worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Melksham customers.
How long does AGA removal take?
A two-oven AGA usually takes three to five hours to dismantle, clear and remove. A four-oven model, a Rayburn with a boiler, or a cooker with a long or awkward route can take most of a day. The cooker must be switched off at least 24 hours beforehand so the cast iron is cold enough to handle.
Can an AGA be removed in one piece?
Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.
Helpful guides
How Much Does AGA Removal Cost in the UK?
AGA removal in the UK typically costs £350–£550 for a two-oven model and £450–£750 for a three or four-oven model, including on-site…
Read the guide →Removing an Oil-Fired AGA or Range Cooker and Its Oil Supply
Removing an oil-fired AGA, Rayburn or range cooker starts with an OFTEC-registered engineer isolating and disconnecting the oil supply. The…
Read the guide →Get a free aga and range cooker removal quote in Melksham
Tell us what you need and we'll come back with a clear price.
Request a quote