Devon · South West
AGA and Range Cooker Removal in Teignmouth
Homeowners in Teignmouth and across Devon use us to remove old AGAs before refitting, with fuel disconnection coordinated in advance.
Rayburn or AGA removal across Teignmouth. Request your price.
Our Teignmouth coverage
We cover all of Teignmouth and the wider Devon area. That includes the TQ14 postcode districts. The same team covers Kingsteignton, Dawlish, Shaldon, Bishopsteignton and Dawlish Warren too.
Local considerations in Teignmouth
Local stone, cob and lime-rendered buildings are common in parts of the South West, so materials need to suit older, breathable construction. Newer Teignmouth homes with electric AGAs or range cookers are usually quicker to clear because there is no flue or fuel line to deal with. Damp, salty air in Teignmouth can rust enamel edges and hotplate lids, which affects whether an old cooker is worth reconditioning.
Long carries across yards and gravel drives near Teignmouth are normal for our crews, but tell us how far the van can get. Oil-fired and solid-fuel AGAs and Rayburns are common in farmhouses around Teignmouth, and we coordinate the right engineer for each.
AGA and Range Cooker Removal jobs we handle in Teignmouth
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
How much it costs in Teignmouth
- Rayburn or Stanley with boiler: £350–£600. Heating system must be drained and capped by a plumber before work starts.
- Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
Prices are a guide. Your quote for Teignmouth is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Teignmouth
Can you remove a range cooker from my Teignmouth kitchen?
Yes. We remove modern range cookers in Teignmouth using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.
Do you remove Rayburns in Teignmouth?
Yes. We remove Rayburns, Stanleys and Esse cookers in Teignmouth and nearby Newton Abbot. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
How much does AGA removal cost in Teignmouth?
AGA removal in Teignmouth typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Will AGA removal in Teignmouth damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Teignmouth homes are covered carefully throughout.
Do old AGAs contain asbestos?
Some older cast-iron cookers can contain asbestos in rope seals, gaskets, flue pipes or insulation, especially models made several decades ago. Not all do, and you cannot tell by looking. If your cooker or flue is old or its history is unknown, have it sampled by a qualified surveyor before dismantling, so any asbestos is removed safely and legally.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
Helpful guides
Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Removing an Oil-Fired AGA or Range Cooker and Its Oil Supply
Removing an oil-fired AGA, Rayburn or range cooker starts with an OFTEC-registered engineer isolating and disconnecting the oil supply. The…
Read the guide →Get a free aga and range cooker removal quote in Teignmouth
Tell us what you need and we'll come back with a clear price.
Request a quote