Leicestershire · East Midlands
AGA and Range Cooker Removal in Shepshed
We dismantle and remove cast-iron AGAs, Rayburns and range cookers from homes across Shepshed, recycling or reconditioning the castings.
Where we work around Shepshed
Shepshed is in the Leicestershire council area in the East Midlands. Postcodes we cover here include LE12. We also take jobs in Whitwick, Hathern, Sutton Bonington and Thringstone.
AGA and Range Cooker Removal in Shepshed: local know-how
Long carries across yards and gravel drives near Shepshed are normal for our crews, but tell us how far the van can get. Village cottages around Shepshed often have low beams and small doors, so castings are carried out one at a time with care.
The East Midlands has a large stock of red-brick terraces and inter-war semis in its cities, with plenty of villages and new estates in between. On modern estates in Shepshed, level access and good parking keep heavy cooker removals straightforward.
What we can do in Shepshed
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
Typical costs in Shepshed
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
- Fuel disconnection by qualified engineer: £75–£150. Gas Safe, OFTEC or electrical isolation, depending on the cooker's fuel type.
Prices are a guide. Your quote for Shepshed is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Shepshed
Is my old AGA in Shepshed worth reconditioning?
It might be. Send photos of the enamel, hotplates, doors and data badge, and we will give an honest view. Good-condition cookers can reduce the removal cost for Shepshed customers.
Do you remove Rayburns in Shepshed?
Yes. We remove Rayburns, Stanleys and Esse cookers in Shepshed and nearby Loughborough. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
How long does AGA removal take in Shepshed?
Most two-oven AGA removals in Shepshed take three to five hours. Larger models, Rayburns with boilers, or long carries to the van can take most of a day. Switch the cooker off at least 24 hours beforehand.
Can you arrange an engineer to disconnect my AGA in Shepshed?
Yes. We can arrange a Gas Safe engineer, OFTEC technician or electrician in Shepshed, depending on your cooker's fuel, so it is safely isolated before our dismantling team arrives.
Can an AGA be removed in one piece?
Almost never. An assembled AGA is too heavy and too wide for most doorways, and moving it whole risks floor damage and injury. It was built on site from sections and has to come out the same way. Dismantling also allows the insulation to be removed and bagged properly before the castings are carried out.
How heavy is an AGA cooker?
A traditional two-oven cast-iron AGA weighs around 400 kg, and larger four-oven models weigh considerably more. That is why AGAs are never moved in one piece. They are dismantled on site into hotplates, oven castings and panels, the heaviest of which weigh roughly 50–90 kg and can be carried by two people.
Helpful guides
Replacing an AGA: Electric Conversions, Range Cookers and More
If an old oil, gas or solid fuel AGA is too costly to run, the main options are converting it to electric, replacing it with a modern…
Read the guide →Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Get a free aga and range cooker removal quote in Shepshed
Tell us what you need and we'll come back with a clear price.
Request a quote