Guide · Homeowners · 4 min read · Updated 16 November 2026
Replacing an AGA: Electric Conversions, Range Cookers and More
Short answer
If an old oil, gas or solid fuel AGA is too costly to run, the main options are converting it to electric, replacing it with a modern controllable AGA, fitting a conventional range cooker, or removing it and redesigning the space. Conversion keeps the look, while replacement gives more control. Removal of a two-oven AGA typically costs £350–£550 before any fuel disconnection.
Why people replace old AGAs
Traditional AGA cookers were designed to stay on all the time, storing heat in a heavy cast-iron core and radiating it into the kitchen. That makes them lovely to cook on and good at warming the room, but running costs can be high, particularly for oil and gas models in a warm summer. As fuel prices have risen, many owners have looked for ways to cut costs without losing the character of the kitchen.
Age is another factor. Some older cookers are reaching the end of their working life, and parts or servicing can become harder to arrange. Others were installed by previous owners and simply do not suit the way the household cooks.
Option 1: convert to electric
Several specialist companies convert older oil, gas and solid fuel AGAs to run on electricity, sometimes with controls that let the ovens and hotplates be switched on independently or on timers. The cast-iron body stays in place, so the look of the kitchen does not change, and the cooker no longer needs a flue or fuel supply.
Conversion costs vary with the model and the system chosen, and it needs a suitable electrical supply, which may mean a new circuit. It is worth getting a survey from a conversion specialist and an electrician before deciding.
Option 2: a modern AGA or range cooker
Modern AGA models and similar heat-storage cookers offer far more control than older ones, with independently controlled ovens and hotplates that can be turned off when not needed. Alternatively, a conventional range cooker gives the large, traditional look with ovens and a hob that are only on when you cook.
Both options mean removing the existing cooker. Check the dimensions carefully: a new range cooker may be a different width or depth, and the space left by an AGA, which often sits in a chimney breast or alcove, may need adapting.
| Option | Keeps the look | Running costs | Work involved |
|---|---|---|---|
| Electric conversion | Yes | Lower, more control | Conversion kit, electrical supply |
| Modern controllable AGA | Similar | Lower than old models | Remove old cooker, install new |
| Conventional range cooker | Similar style | Only on when cooking | Remove old cooker, gas or electric supply |
| Remove and redesign | No | Depends on new appliances | Removal, building and kitchen work |
Option 3: remove it and redesign
Some owners remove the AGA altogether and use the space for a new range cooker, a run of units or an open fireplace. This is the biggest change and often part of a full kitchen refit. The flue, chimney and any oil or gas supply need to be dealt with properly, and the floor and walls behind the cooker may need repair.
Remember that a traditional AGA often heated the kitchen. If you remove it, check whether the room will need a radiator or other heating.
What removal involves
An AGA can weigh several hundred kilograms, which is why it is always dismantled rather than moved whole.
- Fuel disconnection by the right engineer: Gas Safe registered for gas, OFTEC registered for oil.
- Letting the cooker cool for a day or more, as the cast iron holds heat.
- Dismantling the cooker into lids, plates, oven doors, castings and the core.
- Checking older models for asbestos-containing materials before work starts.
- Carrying heavy cast-iron sections out safely and protecting the floor.
- Making safe or capping the flue and leaving the area clean.
Making good the space
Removing an AGA leaves more than an empty gap. The floor beneath may be uneven, stained or a different finish from the rest of the kitchen, because it was never seen. Walls and the chimney breast behind the cooker can be discoloured by heat, and there may be holes where the flue, fuel pipe or water pipes passed through. Budget for floor repairs, plastering and decorating as part of the project.
If a new range cooker is going in the same space, measure the gap carefully after removal, as AGA alcoves are not always square. A kitchen fitter may need to adjust the units on either side, fit filler panels or build a new surround. Range cookers also need a suitable splashback and a cooker hood that suits the width of the hob.
Check what is above the cooker too. Many AGAs sit under a canopy or a shelf that was designed around them. These may need adapting or replacing to suit a new appliance, and some canopies are not suitable as cooker hoods for a conventional hob.
Costs to budget for
Guide prices for removal are around £350–£550 for a two-oven AGA and £450–£750 for a three or four-oven model, with modern range cooker removal at £110–£180. Fuel disconnection by a qualified engineer is typically £75–£150. If the cooker is old enough to contain asbestos, sampling costs from about £150 before removal can go ahead.
Older AGAs that still work, or that are suitable for reconditioning, sometimes have resale value. A removal specialist can tell you whether yours is worth selling.
Choosing the right route
If you love the cooker but not the running costs, conversion is usually the first option to explore. If you want modern control and a new appliance, a modern AGA or range cooker suits. If the kitchen is being redesigned anyway, removal gives the most flexibility. Get quotes for each route, including the electrical and building work, before deciding.
Questions people also ask
Is it worth converting an old AGA to electric?
For many owners who like the cooker but find it expensive to run, conversion is worth considering, as it keeps the look while improving control. Get a survey and quote from a conversion specialist, and check your electrical supply, before deciding.
Does an AGA heat the kitchen?
Traditional always-on AGAs give off a lot of heat and often warm the kitchen and nearby rooms. If you replace or remove one, the kitchen may feel colder, and you may need to add a radiator or other heating.
Can an AGA be moved in one piece?
No. AGAs are made of heavy cast-iron sections and are always dismantled for removal or relocation, then rebuilt if they are being reinstalled elsewhere.
Written and checked by the AGA and Range Cooker Removal team. Read our editorial policy.
More guides
How Much Does AGA Removal Cost in the UK?
AGA removal in the UK typically costs £350–£550 for a two-oven model and £450–£750 for a three or four-oven model, including on-site dismantling,…
How Is an AGA Removed? The Dismantling Process Explained
An AGA is removed by dismantling it where it stands. A qualified engineer makes the fuel supply safe, then the team removes the lids, top plate,…
Asbestos in Old AGAs and Range Cookers: What to Check
Older AGAs, Rayburns and other cast-iron cookers may contain asbestos in rope seals, gaskets, insulation, flue pipes or heat shields. You cannot tell…
Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or offset the…
Preparing for AGA or Range Cooker Removal: A Checklist
To prepare for AGA or range cooker removal, book the right engineer to make the fuel safe, turn the cooker off 24 to 48 hours ahead, have any boiler…
Removing an Oil-Fired AGA or Range Cooker and Its Oil Supply
Removing an oil-fired AGA, Rayburn or range cooker starts with an OFTEC-registered engineer isolating and disconnecting the oil supply. The cooker is…
Get a free aga and range cooker removal quote
Tell us what you need and we'll come back with a clear price.
Request a quote