Kent · South East
AGA and Range Cooker Removal in Sittingbourne
Kitchen designers and builders working in Sittingbourne hand us the AGA strip-out so their project starts on a clean slate across the South East.
Rayburn or AGA removal across Sittingbourne. Request your price.
Covering Sittingbourne and nearby
We cover all of Sittingbourne and the wider Kent area. Jobs here are mostly in the ME10 and ME9 postcode areas. Nearby places we also cover include Iwade and Teynham.
What to expect in Sittingbourne
If your Sittingbourne AGA sits in a kitchen-diner, we seal off the area as far as possible to limit insulation dust. Many Sittingbourne families replace an AGA with a modern range during an extension or kitchen refit, and we time the removal to suit the builder.
Clay soils across much of the South East move with the seasons, which affects anything built into the ground, from walls and bases to drainage. Newer Sittingbourne homes with electric AGAs or range cookers are usually quicker to clear because there is no flue or fuel line to deal with.
AGA and Range Cooker Removal services in Sittingbourne
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
AGA and Range Cooker Removal prices in Sittingbourne
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
- Three or four-oven AGA: £450–£750. Longer dismantle and more castings to carry; route and access affect price.
Prices are a guide. Your quote for Sittingbourne is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Sittingbourne
Will AGA removal in Sittingbourne damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Sittingbourne homes are covered carefully throughout.
How much does AGA removal cost in Sittingbourne?
AGA removal in Sittingbourne typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Do you remove Rayburns in Sittingbourne?
Yes. We remove Rayburns, Stanleys and Esse cookers in Sittingbourne and nearby Chatham. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
Can you remove a range cooker from my Sittingbourne kitchen?
Yes. We remove modern range cookers in Sittingbourne using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.
What do I do if my Rayburn heats my radiators?
If your Rayburn or Stanley has a boiler, a plumber or heating engineer must drain the heating system and cap the flow and return pipes before removal. You will need another source of heating and hot water ready, or arranged soon after. We can coordinate timing with your heating engineer to keep the gap as short as possible.
Will removing my AGA make a mess?
Dismantling an AGA is dusty because the oven castings are packed in insulation. A good team lays boards and dust sheets, vacuums insulation as each section comes out using an industrial extractor, and bags it immediately. The work area should be left swept and vacuumed, though we recommend moving delicate items out of the kitchen beforehand.
Helpful guides
Should You Sell, Recondition or Scrap an Old AGA?
If your AGA has sound castings, decent enamel and a complete set of lids, it may be worth selling to a reconditioner, which can reduce or…
Read the guide →Preparing for AGA or Range Cooker Removal: A Checklist
To prepare for AGA or range cooker removal, book the right engineer to make the fuel safe, turn the cooker off 24 to 48 hours ahead, have…
Read the guide →Get a free aga and range cooker removal quote in Sittingbourne
Tell us what you need and we'll come back with a clear price.
Request a quote