Hampshire · South East
AGA and Range Cooker Removal in Tadley
We dismantle and remove cast-iron AGAs, Rayburns and range cookers from homes across Tadley, recycling or reconditioning the castings.
Where we work around Tadley
We cover all of Tadley and the wider Hampshire area. Postcodes we cover here include RG26 and RG7. The same team covers Mortimer and Sherborne St John too.
AGA and Range Cooker Removal in Tadley: local know-how
Oil-fired and solid-fuel AGAs and Rayburns are common in farmhouses around Tadley, and we coordinate the right engineer for each. Long carries across yards and gravel drives near Tadley are normal for our crews, but tell us how far the van can get.
Commuter towns across the South East mix older town-centre terraces with large newer estates, and driveways are more common than in London. Flue pipes in older Tadley homes may be asbestos cement, so we recommend testing before any work starts.
What we can do in Tadley
Modern Range Cooker Removal
Removal of 90cm to 150cm dual-fuel, gas and electric range cookers such as Rangemaster, Falcon, Mercury and Lacanche, using extra crew and specialist trolleys.
Flue and Fuel Line Making-Safe Coordination
Arranging the right qualified engineer for gas, oil, LPG or solid-fuel cookers so the supply and flue are made safe before dismantling starts.
Asbestos-Aware Removal of Older Cookers
Safe handling of older heat-storage cookers where rope seals, gaskets, flue pipes or insulation may contain asbestos, with testing arranged before work starts.
Reconditioning Assessment and Cast-Iron Recycling
Advice on whether your old cooker could be reconditioned and resold, and responsible recycling of cast iron, steel and enamel when it cannot.
AGA Dismantling and Removal
Full on-site strip-down of two, three and four-oven AGAs into manageable cast-iron sections, removed through standard doorways and recycled or reconditioned.
Rayburn, Esse and Stanley Removal
Removal of cast-iron range cookers with boilers or back boilers, including those linked to central heating and hot water systems.
Typical costs in Tadley
- Two-oven AGA dismantle and removal: £350–£550. Full on-site strip-down, insulation removal, clean-up and cast-iron recycling.
- Modern range cooker, 90–110cm: £110–£180. Three-person team with skates and trolleys; fuel supply must be capped first.
- Asbestos sampling before removal: from £150. Recommended for older cookers or flues of unknown history before any dismantling.
Prices are a guide. Your quote for Tadley is a fixed price based on the details you give us. Full price guide.
AGA and Range Cooker Removal questions from Tadley
Will AGA removal in Tadley damage my floor?
We lay protective boards and dust sheets before dismantling, and carry castings rather than dragging them. Original tiles and flagstones in older Tadley homes are covered carefully throughout.
How much does AGA removal cost in Tadley?
AGA removal in Tadley typically costs £350–£550 for a two-oven model and £450–£750 for three or four ovens, including dismantling, clean-up and recycling. Fuel disconnection is extra if needed. Send photos for a fixed price.
Do you remove Rayburns in Tadley?
Yes. We remove Rayburns, Stanleys and Esse cookers in Tadley and nearby Thatcham. If the cooker runs your heating, a plumber must drain and cap the system first, and we can coordinate timings.
Can you remove a range cooker from my Tadley kitchen?
Yes. We remove modern range cookers in Tadley using a three-person team, skates and trolleys. The gas must be capped by a Gas Safe engineer first, which we can arrange.
What should I do to prepare for AGA removal?
Switch the cooker off at least a day before, arrange or confirm the fuel disconnection, and clear the kitchen of anything fragile. Empty the warming oven and remove any rails or utensils hung on the cooker. Make sure there is parking close to the door for a van, and tell us about steps or narrow corridors on the route.
Can you remove a modern range cooker such as a Rangemaster?
Yes. Modern dual-fuel and gas range cookers are not dismantled like an AGA, but they are heavy and wide. We remove doors, shelves and panels to lighten them, then use skates and trolleys with a three-person team. The gas must be capped by a Gas Safe registered engineer before we move the cooker.
Helpful guides
Preparing for AGA or Range Cooker Removal: A Checklist
To prepare for AGA or range cooker removal, book the right engineer to make the fuel safe, turn the cooker off 24 to 48 hours ahead, have…
Read the guide →Removing an Oil-Fired AGA or Range Cooker and Its Oil Supply
Removing an oil-fired AGA, Rayburn or range cooker starts with an OFTEC-registered engineer isolating and disconnecting the oil supply. The…
Read the guide →Get a free aga and range cooker removal quote in Tadley
Tell us what you need and we'll come back with a clear price.
Request a quote